Sanyo Universal Remote Codes & Programming Guide

Sanyo-universal-remote-codesNowadays, We’re dependent on smart devices to offer better fun or relaxation. Also, we must know how we can use these types of devices. Therefore, we recommend the universal remote codes for Sanyo tv, It works well with Sanyo systems at home or in the offices. You’ll also read many informative methods in this blog and codes like 3 digit or 4 digits Sanyo universal remote codes to switch your TV with multiple features.

You can also get the GE and RCA universal remote codes for Sanyo and other codes for Philips, Magnavox, and Sony TVs.


5 Digit Code for Sanyo TV


4 Digits Sanyo Universal Remote Codes

0108 0110
0012 0004

3 Digit Codes Sanyo Universal Remote

069 108

RCA Universal Remote Codes for Sanyo

1048 1169
1107 1073

Philips Codes For Sanyo


One for All  & GE Universal Remote Codes for SANYO TV

0268 0049
0012 0004

SANYO TV Codes for DirecTV Remote

  • 10154
  • 10208
  • 10339
  • 11142
  • 10088
  • 10893
  • 10107
  • 10799
  • 10146
  • 10484
  • 10159
  • 10232

Magnavox Codes For Sanyo TV

  • 0035
  • 0039

Sanyo TV Codes for Sony Remote

  • 335
  • 330

Sanyo Codes for Comcast Xfinity Remote

  • 10159
  • 10154

Sanyo Codes for Cox remote

  • 0088
  • 1142
  • 0054
  • 0799
  • 0154


How to Program a Remote to Sanyo TV With Auto Search

Using this method, all the universal remote codes are scanned. One code scan at a time in order to search for the perfect remote code. This method also works for old Sanyo tv remote codes, follow these steps:

  • Firstly, Turn On your smart device.
  • Press the device button just for three seconds then LED light will appear.
  • Click on the “CH+” & “CH-” switches on your remote to control the device. On and Off signals will appear on the remote.
  • Now press the “up” or “down” key continuously, The device will turn off.
  • Press the power key to check if the code is correct. The device should start. When it starts you can confirm by changing its channel.
  • Once you have entered the code, tap the “device” button for saving the code. Led will blink twice to indicate that the code has been stored.

How to Setup Sanyo Universal Remote With Manual Method

In this method, We need a key code that identifies the brand and type of a system, so we can easily program a universal remote.

  • Switch On the Device.
  • With “Sanyo universal remote” — click on “TV”
  • Hold the “Setup button” until the “Light Flash” appears.
  • Type the “Keycode”.
  • Take your remote towards the TV and hold down the “Power” button.
  • Now the screen turns off when you Press and hold the “Power Button”.

After performing this procedure for Sanyo tv program codes, the Sanyo universal remote control code will work with your TV. If it does not work, retry the same procedure using different codes one by one.

How to Program Sanyo Universal Remote With Code Search

When you couldn’t find the correct code then universal remote codes can find in the code search mode. This code can be found in the Sanyo tv remote control manual, which forces into the search mode.

  • Let’s start the device.
  • For a few seconds hold down the Setup button.
  • Enter “9-9-1” three-digit code
  • Press “Power Button” and change the Channels until the device turns off.

These methods might take a while, but finding the keycode is very important. When you’ve done, make sure your remote is working for all purposes.



In our blog, we write every type of Universal remote code, but here we give detailed information on Sanyo Universal remote, after reading and applying this topic please leave a better comment in the comment section and share with your members as well. Thanks!