Philips Universal Remote Codes & Setup Guide

You can operate almost any device (TV, DVD player, Blu-ray player, or cable box) with a Philips universal remote. This article will help you to set up the process using Philips universal remote codes.

The only thing you need to do is look up the brand name below and pick the code from the table, and then follow the programming guide as it is written down in the table.

Philips Universal Remote 4 Digit Codes List

Here are some of the four digit codes for Philips remotes you can use to program your audio and video devices. Here are a few models

• SRP1003/27
• SRU2040
• SRU2103/27
• SRU2103S
• SRU3003/27
• SRU3004/27
• SRU4006/27
• SRU4007/27
• SRU4105/27
• SRU4106/27
• SRU5106/27
• SRU5107/27
• SRU5108/27

There are also several other universal remote controls from Philips that can also be configured with these codes.

GE Universal Remote Codes For Philips

One For All Universal Remote Codes For Philips

RCA Universal Remote Codes For Philips

Magnavox Universal Remote Codes For Philips

How to Program Philips Universal Remote Without Codes

In the first method, Universal remote codes scan through the automatic search process. During the scanning process, one code is scanned one at a time to find the correct code that works with your remote to program the control. You must follow these steps to set up your remote:

1. “Turn On the TV” or any other device like that you need to operate with a universal remote.
2. Now start the remote with the “Turn on” option and “Press the Device Button” for at least 3 seconds.
3. An LED light will appear which means this device is ready to program.
4. Bring the remote up to the device and click the “CH+” & “CH-” buttons. Your remote will indicate on/off signals.
5. Keep pressing the “up or down” key until your device turns off.
6. To confirm your code, simply press the “Power key”. The device should Turn on. As it starts, try changing channels to see if the remote works.
7. Save your code by clicking the “Device” button and watch the LED blink twice, indicating that the code has been successfully stored.

How to Program Philips Universal Remote With Manual Method

For this method, only the keycode is needed to program the universal remote. It recognizes the type and model of your device.

1. “Switch On” the device
2. Tap the “TV Button” on your Philips universal remote
3. Once you “Press and Hold” the setup button of the universal remote for a few seconds, the Light will appear (It shows the remote is now in Learning mode).
4. Put the “Keycode” that you found in the programming manual.
5. After you have completed all of these steps, point your remote towards the TV device and then “Press and Hold the Power” button
6. If you see that the screen has turned off, you can release the power button.

Now that everything is done, check to see if your TV works with your universal remote. If you still experience any issues, try the process again using a different code as described in the reference table.

How to Program Philips Universal Remote With Code Search

With this method, you can set your remote in search mode to find the correct one. There’s a code in the instruction booklet that lets you put the remote in search mode

1. “Switch On” the Device
2. “Press and Hold” the Setup button
3. Put the 3 digit code (9-9-1)
4. Press and hold the “Power Button” on the remote and then press the Ch+, wait until the TV goes off.

But remember, You need to find the key code to process this method, It also can take some extra time to process all the functions correctly.

Final Words

Make sure your device is connected before attempting these Philips universal remote codes methods, and then follow the instructions step by step. I hope this will help you to connect your single remote to multiple devices at the same time.