GE Universal Remote Codes & Programming Guide

There are many home appliances like a television, CD, and DVD player almost every technology device has its own remote control. There are many categories of remotes that confuse us. So in this article, we’ll only discuss one GE remote and how we can setup up with GE Universal Remote Codes.

It is compatible with a wide range of audio and video devices. This article also explains how to program a GE universal remote with proper instructions in the below section.

Let’s get started

GE UNIVERSAL REMOTE Codes CL3, CL4, AND CL5 List.

There are three versions of GE universal remote controls: CL5, CL4, and CL3. You only need to enter the correct code. The following is a complete list of GE codes for all TV brands. You can find the codes according to the name of your device.  Also, we provided some guides to help you configure the GE universal remote in the next steps.

Codes are the following:

GE Universal Remote Codes for LG TV

You might be confused to do a program or this can be impossible for you because you are not a perfect programmer. But don’t worry because you’ll be able to follow 4 digit general electric universal remote codes and can change the normal remote into a GE universal remote.

GE CABLE Set-top Box Devices Universal Remote Codes

GE DVD Universal Remote Codes List

GE TV/DVD Combos Universal Remote Codes

GE DVD Recorders + RW Universal Remote Codes

GE HDTV Set Top Boxes Universal Remote Codes

GE TV/VCR/DVD Combos Universal Remote Codes

GE SAT/DTV/WebTV Universal Remote Codes

GE VCR Universal Remote Codes

ACCELE	0354
AUDIOVOX	0245
AT&T	0373
APEX	0949
ALLEGRO	0247 0243 0329
AIWA	0245 0269 0251 0227
ADVENTURA	0251
AUDIO DYNAMICS	0234 0376 0377
ASHA	0354
AMERICAN HIGH	0292
AKAI	0337 0254 0230 0303 0231 0228 0227 0229
AIKO	0252
ADMIRAL	0226
BROKSONIC	0237 0394 0257 0289 0967 0310 0256 0250
BELL & HOWELL	0268
BEAUMARK	0354
CYBERNEX	0354
CRAIG	0248 0356 0245 0354
COLORTYME	0234
CINEVISION	0245
CARVER	0287
CANNON	0339 0225 0292
CALIX	0245
CURTIS MATHES	0292 0234 0354 0249 0358 0334 0227 0287 0225
COLT	0356
CCE	0252 0356
CITIZEN	0240 0245 0252 0354 0234 0242 0244
CAPEHART	0329
CANDLE	0240 0245 0354 0234 0242 0244
DYNATECH	0227 0251
DIMENSIA	0225
DBX	0376 0377 0234
DAEWOO	0279 0240 0250 0252 0334 0242 0244 0251 0971
DIAMOND VISION	0896
DURABRAND	0245
ELECTROHOME	0245 0254
EMERSON	0250 0245 0252 0256 0257 0290 0310 0325 0354 0240 0233 0227 0265 0266 0268 0269 0458 0456 0231 0237 0249 0251 0254 0259 0262 0263 0270 0289 0292 0301 0330 0341
ELECTROPHONIC	0245
FUNAI	0227 0456 0458 0251
FUJI	0229 0292
FISHER	0304 0268 0267 0287 0234 0248 0273 0274
GO-VIDEO	0354 0375 0407 0426 0455 0971 0368
GOLDSTAR	0227 0245 0338 0329 0346 0234
GARRARD	0251
GE	0225 0311 0335 0342 0354 0278 0292
GRADIENTE	0251
HARLEY DAVIDSON	0251
HI-Q	0248
HEADQUARTER	0268
HARMAN KARDON	0234 0254
HARWOOD	0356
HITACHI	0369 0227 0347 0303 0332
INSTANT REPLAY	0227 0292
INTEQ	0245
INFINITY	0288
INSIGNIA	0245
JVC	0376 0377 0268 0247 0418 0900 0234 0303
JC PENNEY	0225 0245 0268 0354 0369 0376 0377 0292 0303 0332 0343 0234
JENSEN	0369 0303
JCL	0292
KODAK	0245 0292
KENWOOD	0268 0376 0377 0234 0303
KLH	0356
LXI	0227 0245
LG	0227 0329 0338 0907
LLOYD	0227 0251
LOGIK	0356
LITEON	1069
MAGNAVOX	0287 0288 0329 0227 0226 0225 0456 0286 0235 0914 0969 0292
MEMOREX	0287 0245 0268 0304 0310 0329 0354 0226 0227 0337 0248 0251 0292
MULTITECH	0227 0354 0251 0278 0356
MAGNIN	0354
MARANTZ	0287 0268 0376 0377 0289 0292 0339 0234
MEI	0292
MEDION	0896
MATSUSHITA	0292
MARTA	0245
MGA	0290 0254
MITSUBISHI	0290 0298 0369 0376 0377 0295 0254
MGN TECHNOLOGY	0354
MTC	0227 0354 0251
MONTGOMERY WARD	0226 0300
MOTOROLA	0226 0292
MINOLTA	0369 0332
MIDLAND	0278

GE DVD/VCR Combos Universal Remote Codes

GE DVR/DVD Combos Universal Remote Codes

GE DVR/SAT Combos Universal Remote Codes

GE DVR/CABLE Combos Universal Remote Codes

GE Laser Disc Universal Remote Codes

GE DVR Universal Remote Codes

GE Home Automation Codes

GE Home Theater in a Box (HTIB) Universal Remote Codes

GE TV/VCR Combos Universal Remote Codes

Blue GE Codes

SONIC BLUE	0937,0373
Blueway Air Conditioner Codes	0300

How to Program GE Universal Remote with Code Search

• After putting all the things together, “Turn on the Device” to control the GE remote programming.
• Press the “Set-up button” on the remote then at the same time the red light will blink on.
• When your remote has no device button now you can use any device button like a Set-top box etc.
• Now, Write the device code by using the number buttons.
• Start from the top if you see many codes at a time.
• If you enter the right code the red light switches off.
• Ge remote tv control codes operate when the Red Light Turns off. Otherwise, try another remote control code from the list of GE remote control codes.
• Using the pointing device, press the Power Button.

How to Set Up GE Universal Remote Without Codes

1. We use the universal remote for smart apparatus as “Tv”.
2. Now “ Turn on” this device.
3. Just for three seconds press the Device Button to switch on the remote.
4. LED light recognizes that the device is properly prepared for the program.
5. The remote represents On or Off signals when you tap on the CH+ and CH- switches.
6. Hold and Press the Up and Down keys for a while until the device will Shut Down.
7. Recheck the code by squeezing the Power Key.
8. Now the device must be turned on. After that, you Press the Keys and change the channels and ensure that your remote is working perfectly.
9. Save the code by tapping the “device” button. If the code was successfully stored, the device’s LED will blink twice.

How to Program Manual GE Universal Remote Codes

This key code allows for easy programming of universal remote control, as well as identifying your equipment’s make and model.

• • Start by turning the Device On.
  • Use the “GE Universal Remote” and Switch on the TV.
  • As you press the Setup button Light Flash turns on.

• Now press the key code that you gained from the programming instruction table.
• After all steps, you have done. Then
• Once you’ve done this procedure, just “point your remote at the TV” and “hold the power button” for a few seconds — you will see the TV light up.
• Then Stop pressing the Power button when the screen is Turned off.

Once you complete the above procedure, the universal remote control works perfectly with your TV. If the device is not operating well, repeat the same steps using another code derived from the same table.

How to Program GE Universal Remote With Code Search

It is possible to set up your universal remote control toward the search mode to find the correct key code if you were unable to locate it. In the manual, there is a code that forces it to enter search mode.

• Let’s start with “Turn it on”
• Activate the “Setup” button by holding it for a few seconds
• Put in the “9-9-1” (three-digit) code
• Hold down the “Power Button” 
• Then switch to the next channel until the device “Turns Off”.

Finding the keycode is a very important step but it takes some time. The universal remote should work for all in-built functions once you have completed the above steps.

GE Universal Remote:

1. Initially, Open the Ge universal remote battery section and take out the batteries.
2. Then look at the version number of your remote, If you have any confusion, is the version older or the latest? So here is the main thing to consider the GE cl3 or cl4 codes are the latest and V1-V5,none=V1 is older.
3. After that enter the batteries again and put back the battery cover.
4. Check the above table to find the complete list of programming codes for GE universal remote. This would be a very convenient place for you, as it is easy to read and understand.
5. Then you have to find out the universal cl3,cl4, or cl5 codes with the help of scrolling. You’ll find the version number within the battery of the GE Universal Remote. Click the button that corresponds to that version number.
6. After that, choose the appropriate device category from the drop-down menu.
7. You will be able to view the codes associated with that device.

Programming Your GE Universal Remote Control to ANY Device

What If GE Universal Remote Code Does Not Work?

1. When you select the first code and it does not work now try another code from the table which We gave in above.
2. If your problem is not solved then you replace the battery compartments from the device remotes.
3. It may be possible to remove a physical barrier that is blocking the remote from connecting to the device.
4. Many features are used for GE Universal Remote and mostly it doesn’t work with many features so should try to use more buttons.

In this article, we will show you how to program a GE Universal Remote to eliminate the trouble of having so many remote controls. We will show you how to do this easily, and everyone can do it. You have a chance to try it now.

FAQS

How Do I Program a Ge Universal Remote?

There are four options for your remote: TV, CBL, DVD, and aux. With these buttons, you can program any device. When you are ready, I have listed the codes here, find your code or remove your battery cover to see the code on the sticker. For example, CL3, CL4, or CL5.

In the following, we discuss how to program by direct entry, which is the easiest method.

• To begin, press the setup button on your remote control
• The power button will glow with a red LED Light
• Press the TV button
• Enter your code, and the red light will go off.
• Let’s turn on the TV.
• Press the volume button to ensure it works

This is how you program a GE universal remote with a TV. You can set other devices in the same way by pressing the appropriate button on top of the remote.

How Do I Find the Code For My Ge Universal Remote?

All the codes are at the top of the page, you will find a complete code list for GE universal remote. LG TVs, GE DVD codes, GE DVD Recorders, HDTV Set-Top Boxes, TV/VCR/DVD/DVR/CABLE, LaserDisc, Home Theater, and all Brands codes list.

How Do I Find My 4 Digit TV Code?

There are 4 different ways to find the 4 digit code.

• You can find the code section in your remote user’s manual. The manual includes a piece of paper that contains some codes.
• When you can’t find your manual, Using a search is an easy way to do this. In this way search for the universal remote codes on our website according to the brand of your remote.
• Thirdly, you can use Code Search by pressing the code search button on your remote. Your remote will automatically find the correct code.
• One last way to get the code is to contact your remote manufacturer. To get the code, you must send the correct model number of your remote to the manufacturer.