Axess TV Remote Codes & Programming Guide (2024)

axess-tv-remote-codesThere is another article on remote codes for the Axess TV. This is a Swedish television company which is owned by the Axel and Margaret Axel-son Johnson Foundation. If you have this model and want to configure your remote.

When pairing your Axess Remote with a TV or audio device, you need to enter Axess TV Remote Codes. An IR blaster is used to transmit the signal to the television. They use remote codes to identify patterns in the transmitted electronic signals.

I included the list of 3 Digit and 4 Digit Remote Codes.

Contents

3 Digit Codes for Axess TV Universal Remote

  • 711

4 Digit Codes for Axess TV Universal Remote

  • 1053
  • 1113
  • 1110
  • 1005
  • 1476

 

axess-tv-remote-manually-program

How To Pair the Axess TV Universal Remote?

There are different methods to find codes for different brands. We’ve explained the following step-by-step process for searching the codes to pair your Axess television.

If one method doesn’t work, try another.

  1. Turn On your TV.
  2. You will need to press the “TV button” on your remote control.
  3. Press and hold the button again, and after a few seconds, the “Red LED Flashes Twice”, then release it now.
  4. Next, enter the three-digit code (9-9-1) (You’ll see two lights blinks on your remote)
  5. Push the “Power TV” and “Device TV” buttons at the same time until the TV turns off.
  6. Be sure to point the remote at your device during the search.
  7. If you wish to search the entire “library of codes”, you may need to press these button sequences multiple times.
  8. If your TV is turned off, you must press and release the “setup button” to save the code.

If you are still unable to find the correct code, consider the following alternatives.

How to Program Axess TV Universal Remote Without Codes

As part of the auto-search method, all universal remote codes are scanned one by one. Each code is scanned to determine if it is correct or not. If it is correct, the remote control is successfully programmed. Follow the steps below:

  1. « Turn on» the smart device you wish to control with the universal remote control, such as a TV.
  2. To activate the remote, press the device’s button (TV, DVD, CBL, and OK/SEL) for 3 seconds. A LED light will appear which means the remote is ready to program.
  3. Turn the remote towards the device and click “CH+” and “CH-“. You will see on/off signals on the remote. Continue pressing the “up” or “down” key until the device turns off.
  4. Click the “power” key to verify the code. Your device should turn on. Check to see if the remote is properly programmed by changing its channel.
  5. Click “device” to save the code. When the code has been stored, the LED of the device will blink twice.

How to Program Axess TV Universal Remote With Manual Method

In case you are unable to use the above methods, Using a keycode can make it easier for you to set up a universal remote and it also identifies the make and model of the equipment.

  • You must first turn on the device
  • On the Axess TV universal remote, press “TV”.
  • When you press and hold the “Setup button” of the Universal Remote, a light will flash (this means the remote is in the “learning mode”).
  •  Final step: Enter the “Keycode” you gathered from the programming guide (Instructions Booklet).
  • When you have completed this procedure, simply hold down the power button while “pointing the remote at the TV”
  • If the screen goes dark, release the “Power Button”

The TV will now work perfectly with the universal remote control. If you are still experiencing problems, try using a different code from the same part of the reference table.

How to Program Axess TV Universal Remote With Code Search

Even if you can’t find the right key code, you can set your universal remote to search mode. Look in the manual book for the code that forces the remote into search.

  • First, turn on the device
  • Hold down the “Setup” button now
  • Type “9-9-1” (three digits) in the field
  • Keep holding the “Power Button” on the remote, then select the Channel up until the device turns off.

It might take a little more time, but discovering your key code is very important. After you have followed the above steps, all its functions should properly work on your remote.

We have shared with you the different ways to set up your Axess remotes. With these codes, you should be able to program your Axess TV and favorite remote control.

Conclusion:

We appreciate your feedback on this article. It will help us to improve our site and reach many people who still need the correct codes. So, we’d love to get your experience about the working codes. Please provide those codes in the comments section below and we will forward them to the users. If you need any other remote codes, please let us know in the comment section below and we will give you those codes.