Panasonic Universal Remote Codes & Setup (October 2022)

Panasonic-Universal-Remote-codesAre Panasonic smart devices like TVs being used in your home? Do you know how to program a Panasonic remote control?

So You will find all Panasonic universal remote codes in the given list which allow you to program your remote with the device.

Panasonic Universal Remote Control Codes

1194 1295
1049 1003
1292 1289
1152 1123
1053 1010
1096

Panasonic HDTV Universal Remote Codes

1234 1442
1233 1336
1140 1169
1331 1410
1417 1231
1170

Panasonic DVD Universal Remote Codes

2076 2151
2105 2153
2031 2111
2154 2104
2066 2075
2106

Panasonic Audio Universal Remote Codes

4005 4050
4051 4030
4018 4063
4038

RCA Universal Remote Codes For Panasonic

1392 1003
1062 1055
1054 1253
1109 1277
1130 1275
1418 1289
1389 1419
1246 1170
1286 1350
1406

GE & One-For-All Universal Remote Codes For Panasonic

0437 0170
0070 0054
0148 0381
0950 0062
0374
0171 0003

Philips Universal Remote Codes For Panasonic

0608 0901
0416 0039
0739 0807
0618 0345
0718 0007
0696

Magnavox Universal Remote Codes For Panasonic

0064 0029 0052

Panasonic-Universal-Remote-codes-program

How to Program a Universal Remote to a Panasonic TV without Codes

The device scanned universal remote codes with the auto search process. It scans one code and confirms if it’s correct or not and then moves on to the next one. The process continues until the code is found To use the program, follow these steps:

  • “Switch On” the device.
  • When the remote is “Turn On”, Press the device button only for 3 seconds. the light will appear which means the device is ready to program.
  • The remote should be positioned at the device and press the keys “CH+” and “CH-“. The remote will show on/off signals.
  • Press the “up” or “down” key continuously, The device will turn off.
  • Make sure the code is correct by clicking the “Power” key. Now the device should be turned on. In order to check that the Panasonic TV remote codes are correct, change the channel if it starts.
  • For code saving, tap the “Device” button. The device’s LED will blink two times to confirm the code has been saved.

How to Program Panasonic Code For Universal Remote With Manual Method

We can easily program a universal remote using the keycode, which identifies the system’s design and configuration.

  • The first step is to Turn On the device
  • With “Panasonic universal remote” choose “TV.”
  • You need to press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash”.
  • Last but not least, enter the “Keycode” that you obtained from the instructional guide.
  • Following this step, you must “Point your remote at the TV” and then press the power button.
  • After the screen turns off, release the “Power Button”.

You should now be able to control your TV with the universal remote. If it does not work, repeat the procedure using another code from the same part of the reference table.

How to Program Panasonic Universal Remote to Tv With Code Search

For those who couldn’t locate the correct code at that time, you can set your universal remote to search mode for the correct one. There is a code in the manual that makes the remote search for the correct code.

  • First, you need to turn on the device
  • Hold down the “Setup” button.
  • Enter the code (9-9-1)
  • Now press and hold on to the “Power Button” on your remote until the TV “Turns Off.”

Although this method might take a bit more time, finding your key code is extremely important. As soon as you have finished the above process, your remote should work for all functions.

Conclusion

Our blog post has listed each and every Universal Remote Codes for Panasonic; however, if we missed any Panasonic remote codes, please comment. We will fix the issues and also mention those Panasonic remote codes.