SHARP TV Universal Remote Codes & Setup (October 2022)

sharp-tv-remote-codesSearching for SHARP TV universal remote codes? This page shows all the codes 3, 4, or 5 DIGIT REMOTE codes.

Sharp remotes can be used to control other devices without requiring multiple remote controls.

After entering the correct code, your TV will begin to work with the universal remote. Also, you must follow the programming methods below.

3 Digit Codes for Sharp TV

013 712
918 509
813 002
014 913
502 111
812

4 Digit Codes for Sharp TV

1097 0165
1312 1078
0386 1157
1311 1375
1004 0093
1081 0039
1009 1153
1378 1274
1077 1011
1064 1025
1099 1298
1362

5 Digit Codes for Sharp TV

11564 12002
10748 11660
12002 11517
10171 11204
11314 11780
12049 11963
11710 10019
11326 11785
11780 11463
10178 11641
12183 10171
10748 11517
11314 10463
11204 11660
11326 11641
11892 11963

GE Universal Remote Codes for Sharp TV

0063 0123
0006 0079
0020 0095
0004 0266
0009 0122
0226 GE Codes

Magnavox Sharp TV Remote Codes

0040 0034
0058 0028
Magnavox Codes

Philips Sharp TV Remote Codes

0813 0509
0913 0228
0907 0111
0224 0603
0502 0002
0202 Philips Codes

RCA Universal Remote Codes for Sharp TV

1004 1447
1006 1012
1026 1029
1112 1357
1095 1171
1443 1113
1173 1111
1122 1265
1372 1196
1423 1261
1437 RCA Codes

One-For-All Sharp TV Codes

0079 0123
0063 0004
0009 0006
0226 0095
0266 0122
0020 One for all Codes

sharp-tv-remote-program

How to Program Sharp TV Universal Remote Without Codes

During the scanning process, all the universal remote codes are entered into the remote using the auto search method. To program the codes, it scans each code at a time to determine which code is correct to work with your remote. The procedure is:

  • Before operating the universal remote you need to turn on your smart device.
  • For a few seconds, press the TV, DVD, and CBL buttons on the remote. The LED light will show that the device is ready to program.
  • Click on the “CH+” and “CH-” keys on the remote to control the device. On/off signals will appear on the remote. The device will turn off when you press the “up” or “down” key continuously.
  • The code can be verified by clicking the “power” key. Once clicked, the device will turn on.
  • Now Verify that the remote is programmed correctly by changing the channels.
  • You can now save the code by tapping on the “device” button. You will see the LED blink twice to indicate the code is successfully stored.

How to Program Sharp TV Universal Remote With Manual Method

The keycode specifies the appliance’s make and style, so we can easily program a universal remote.

  • Turn on your device
  • Press the “TV” button to control your Sharp TV with the universal remote.
  • Press and hold the Setup button for a few seconds, you will see a “light flash”.
  •  The final step is to enter the “Keycode” which you got from the instruction guide.
  • To complete this process, you just need to “point your remote to the TV” and then press and hold the “power” button for a few seconds.
  • When you see the TV screen is turned off, you can press the “Power Button”.

Your TV is programmed with a universal remote control. If it doesn’t work, try to repeat the same process using another code from the same table column.

How to Program Sharp TV Universal Remote With Code Search

If you couldn’t find the key code, the universal remote can be set with a code search method. This is done by entering a code in the manual.

  • To begin, turn on your device
  • Keep holding the “Setup” button
  • Type the three-digit “9-9-1” code
  • Then, press and hold the “Power Button” on the remote “until you see it will be”Power Off”.

Finding your keycode may require some extra time. however, it is very necessary. As a result of the above procedure, all functions should work.

Conclusion:

You can control all the home entertainment devices with one Sharp universal remote control which is easy to use. By properly programming universal remote codes, Your devices can be controlled with ease, fun, and convenience.